LED EYES USER MANUAL

1. Plug into Power Port

Insert the power adapter into your car's 12V or 24V port. Turn the system on using the switch at the top of the adapter—you’ll see a red light when powered.

 

2. Peel Off The Red Sticker

Remove the protective backing from the adhesive strip to prepare for a secure installation.

 

3. Install To Back Or Front Window

Place the LED panel on the window, pressing firmly for a strong, lasting hold.

 

4. Control With Wireless Remote

Use the remote to power on, adjust speed, change modes, and lock settings with ease.

 

Note: The white box is the receiver for the remote. Keep it visible for the best connection.

 

How to Replace LED Panel

Step 1: Locate the Connection Port

Find the port directly connected to the faulty LED panel (circled in the image).

Step 2: Release the Clip

Press down on the clip (indicated by the red arrow) to unlock the connection.

Step 3: Attach the New LED Panel

Disconnect the old panel by pulling the connectors apart, then connect the new panel by aligning the connectors and pushing them together until secure.